2.4GHz Omnidirectional Base Antennas
GP-24 Series
The GP-24x omnidirectional series of antennas were designed to meet various coverage area situations:
GP-24S: 10dBi gain, broad elevation pattern. Provides coverage to areas physically located above and below the Antenna height. Although the coverage range is not as far as the higher gain versions, it provides coverage to areas below and above the antenna installation height.
GP-24R: 12dBi gain, narrow elevation pattern. Provides the greatest possible coverage area. The pattern is fairly narrow, but is directed to the horizon for greatest range/distance.
GP-24-3R: 12dBi gain, 3-degree elevation downtilt. The best selling high-gain access point antenna. The 3deg downtilt concentrates the signal and receive sensitivity to areas at and below the antenna height.
GP-24-3R
High Gain 2.4GHz Access Point Antenna with 3-degree electrical downtilt
1.5:1 or less SWR: 2400-2500MHz
Gain: 12dBi
Max Power: 100 watts
Length: 70 inches
Weight: 2 lb 9oz
Connector: N-female
Max wind speed: 135MPH
Construction: One-piece white fiberglass, all mounting hardware included
GP-24R
High Gain 2.4GHz Wi-Fi Access Point Antenna
1.5:1 or less SWR: 2400-2500MHz
Gain: 12dBi
Max Power: 100 watts
Length: 70 inches
Weight: 2 lb 9oz
Connector: N-female
Max wind speed: 135MPH
Construction: One-piece white fiberglass, all mounting hardware included
GP-24SR
High Gain 2.4GHz Wi-Fi Access Point Antenna
1.5:1 or less SWR: 2400-2500MHz
Gain: 9.9dBi
Max Power: 100 watts
Length: 39 inches
Weight: 1 lb 14oz
Connector: N-female
Max wind speed: 150MPH
Construction: One-piece white fiberglass, all mounting hardware included
SF-245R
2.4GHz Mesh Network/Access Point antenna
1.5:1 or less SWR: 2400-2485MHz
Gain: 7.4dBi
-3dB beamwidth: 20 degrees
Max Power: 50 watts
Length: 17.5 inches
Weight: 7.6 ozs
Connector: N-male connects directly to most access points
Construction: Black fiberglass radome, internal O-rings at the top and bottom prevent moisture intrusion.
Max wind speed: 150+MPH
SF-245W+12SR
2.4GHz Mesh Network/Access Point antenna with 12 degree electrical uptilt
1.5:1 or less SWR: 2400-2485MHz
Gain: 7.4dBi
-3dB Beamwidth: 20 degrees
Max Power: 50 watts
Length: 17.5 inches
Weight: 7.6 ozs
Connector: N-male connects directly onto most access points
Construction: White fiberglass radome, internal O-rings at the top and bottom prevent moisture intrusion.
Max wind speed: 150+MPH
R Suffix designates RoHS compliant
Specially designed for use where the antenna will be attached in the inverted position. The uptilt becomes downtilt, saturating the area below and around the antenna for maximum signal strength and coverage area.
SF-245W-10SR
2.4GHz Mesh A/P antenna, 10 degree electrical downtilt
1.5:1 or less SWR: 2400-2485MHz
Gain: 7.4dBi
-3dB Beamwidth: 20
degreesMax Power: 50
wattsLength: 17.5 inches
Weight: 7.6 ozs
Connector: N-male connects directly to most access points
Construction:
White fiberglass radome, internal O-rings seal the top and bottom from moisture intrusion.Max wind speed: 150+MPHR Suffix designates RoHS compliant
10 degree electrical downtilt directs the radiation pattern to increase the signal strength and coverage area below the antenna height.
SF-245WR
2.4GHz Mesh Network/Access Point Antenna
1.5:1 or less SWR: 2400-2485MHz
Gain: 7.4dBi
-3dB Beamwidth: 20 degrees
Max Power: 50 watts
Length: 17.5 inches
Weight: 7.6 ozs
Connector: N-male, connects directly to most access points
Construction:
White fiberglass radome, o-rings seal the top and bottom from moisture intrusion
Max wind speed: 150+MPH
R Suffix designates RoHS compliant