Mounts/Brackets only
Light duty, 3 adjustment planes, up to 45″ antenna
5/8″ hole accepts SO-239 connectors (Cable assy 3D4M, CK-3M5 etc) or N-female connectors (5D4N, CK-5N etc)
Two set screws hold the bracket to the edge of the door, hood, lift gate, etc…and the mount will adjust to vertical.
When using an antenna with an NMO connector, install the SO-239 cable assembly then adapt the so-239 into an NMO connector with the AD-25M adapter.
Roof-Rack Mount
Adjusts to attach to larger roof racks, up to 2.5 inch width
Recommended for antennas up to 60 inches
5/8″ hole accepts SO-239 connectors (Cable assy 3D4M, CK-3M5 etc) or N-female connectors (5D4N, CK-5N etc)
When using an antenna with an NMO connector, install the SO-239 cable assembly then adapt the SO-239 into an NMO connector with the AD-25M adapter.
Med-duty lip mount, 3 adjustment planes, holds up to 60″ tall antenna.
The RS-720NMO is the only lip mount that has a 3/4″ hole to accept an NMO connector
The RS-720 has the standard 5/8″ hole to accept SO-239 connectors (Cable assembly 3D4M, CK-3M5 etc) or N-female connectors (5D4N, CK-5N etc)
Soft rubber gasket protects the vehicle paint.
Attaches to any lip edge on the vehicle with set screws on the underneath side.
NO NEED to drill holes in the vehicle. Fits over any edge that is no more than 1/4″ thick and adjusts to vertical from any angle. Trunk lid/van door/SUV rear door/rear truck door/hood/etc…
Footprint: 2.1″ x 1.15″
