The CST-30 is an adjustable antenna mounting bracket designed to fit the IC-705, FT-817 and FT-818 radios. A jumper is included to adapt from the BNC connector on the radio to an SO-239 connector for the HFJ-350M Toy Box or similar antenna to screw onto.
Comet – CST-30 – Antenna Bracket for Icom IC705 Yaesu FT817/FT818 Read More »
Window/door feed-through coax cable jumper The CTC-50M jumper allows you to get your antenna coax into the radio room without drilling holes in the wall or leaving a window/door open. The center core of the flat wire coax is “copper-clad steel”. It was chosen for its strength and resistance to metal fatigue. The film is
Comet – CTC-50M – Window Feed Through Jumper SO239-SO239 Read More »
Adapts a threaded 3/8 x 24 connector to a PL-259 Allows an SO-239 mobile mount to accept a 3/8 x 24 threaded antenna stud.
Comet – AD-35M – 3/8×24 to SO-239 Adapter Read More »
Adapts an SO-239 mount to accept an Antenna with an NMO connector
Comet – AD-25M – SO-239 to NMO Adapter Read More »
Adapts an NMO connector to an SO-239
Comet – AD-15M – NMO to SO-239 Adapter Read More »
Adapts an NMO mount to an N-female
Comet – AD-10N – NMO to N-Female Adapter Read More »
Low loss mobile mount coax cable assembly Approximate loss: 2dB at 2400MHz 13′ very low loss coax cable assy recommended for use up to 2500MHz Coax cable outside diameter: approx 5/16″ Gold plated N-connectors Can be used with a lip mount or used alone as permanent hole mount. An o-ring is included to seal
Comet – 5D4NB – 13′ Mobile Antenna Coax Assembly N-Connector-1.2-2.4gGHz Read More »
Standard mobile lip mount cable assembly Can be used with a lip mount or used alone as permanent hole mount. An o-ring is included to seal moisture from migrating under the threaded nut holding the connector in place, but additional water-proofing using silicone is recommended around the connector threads. 16 feet 4 inches of low
Comet – 3D5MB – 16′ Mobile Antenna Coax Assembly SO239-PL259-UHF Read More »
Standard mobile lip mount cable assembly Can be used with a lip mount or used alone as permanent hole mount. An o-ring is included to seal moisture from migrating under the threaded nut holding the connector in place, but additional water-proofing using silicone is recommended around the connector threads. 13 feet of low loss coax,
Comet – 3D4NB – 13′ Mobile Antenna Coax Assembly N Connector Read More »
Standard mobile lip mount cable assembly Can be used with a lip mount or used alone as permanent hole mount. An o-ring is included to seal moisture from migrating under the threaded nut holding the connector in place, but additional water-proofing using silicone is recommended around the connector threads. 13 feet of low loss coax,
Comet – 3D4MB – 13′ Mobile Antenna Coax Assembly SO239-PL259-UHF Read More »
